Filter
Top Products
SYSTM IN TST ( )
0 THRU 9
<HISTORY>: A
<TEST>: B
<DISABLE>: C
<DRILL>: D
<SILENCE>: E
<RESET>: F
Enter digits that correspond to the selected condition by pressing a number key, or one of the
special keys if a hex character is needed. Press [#/Enter] and the previous display appears.
BFSK Report Codes
Shortcut: 0-PROG, 7-PROG FORMATS, 1-BFSK RPT CODS
When BFSK reporting is used, most reporting codes are fixed and do not need programming.
There are five reports that the control panel can send that are not standard BFSK codes:
Off normal at test: Sent if the panel is off-normal at the automatic test time.
Open reset report: Sent when the reset key is pressed.
Silence: Sent when the silence key is pressed.
Fire drill, fire drill restore: Sent for fire drill operations.
The following window displays:
BFSK RPT CDS
1- OFF NORM TEST
2- OPEN/RESET
3- SILENCE
4- FIRE DRILL
5- FR DRIL RSTR
Press the number key that corresponds to your report code selection. A window allowing
entry of two hex digits appears.
HISTORY DEFAULTS
Shortcut: 0-PROG, 8-HSTRY DEFLTS
The following window appears:
PROG DEFAULTS
1- CLEAR HSTRY
2- DEFAULT EE
3- ALT 4/2 CDES
4- (reserved)
Clear History
Shortcut: 0-PROG, 8-HSTRY DEFLTS, 1- CLEAR HISTORY
You can use this option to clear some or all of the history records in the system.
The following window appears:
HIST ITEMS= _______
DEL OLDEST 000
8.7.3
8.8
8.8.1
88 en | Control Panel Programming Fire Alarm Control Panels
2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.