Filter
Top Products
i
Notice!
If using the B420 models, the DX4020, or the ITS-DX4020-G for reporting events, the Modem
IIIa
2
and Contact ID formats are possible:
Account Numbers
Shortcut: 0-PROG, 6-PROG ACC’NTS, 1-PHONE/IP NUMS
The account numbers identify the control panel when it sends reports to the central station.
The display scrolls through the Phone or IP Number options. Press [4] for ACCOUNT NUMS.
The following window appears:
ACCOUNT #1: 0000
NEW NUMBER: 0000
The existing number is shown on the top line. Enter the new number on the second line and
press [#/Enter]. The previous window appears. Enter hexadecimal digits A through F by
pressing [Test] followed by [1] for A, [2] for B, [3] for C, [4] for D, [5] for E and [6] for F.
Tone
Shortcut: 0-PROG, 6-PROG ACC’NTS, 1-PHONE/IP NUMS
The FREQ (_) programming items (refer to window below) modify the reporting format when
3/1 or 4/2 tone burst reporting is selected for the format. Select three parameters with one
setting: data tone frequency, acknowledge tone frequency, and data rate. The frequency that
the control panel uses to send data pulses can be set for 1900 Hz (19D) or 1800 Hz (18D).
The frequency of the acknowledge tone from the receiver to which control panel responds can
be set to 1400 Hz (14A) or 2300 Hz (23A). The rate at which the data pulses are sent can be
set to 10, 20, or 40 pulses per second (10PS, 20PS or 40PS).
The display scrolls through the Phone/IP Number options (refer to 52). Press [5] for TONE.
The following window appears:
FREQ (__)
1- 19D, 14A, 10PS
2- 18D, 23A, 10PS
3- 19D, 14A, 20PS
4- 18D, 23A, 20PS
5- 19D, 14A, 40PS
6- 18D, 23A, 40PS
Press the number key that corresponds to your selection. The previous window appears.
Phone Control
Shortcut: 0-PROG, 6-PROG ACC’NTS, 2-PHONE CONTROL
In addition to features associated with each phone and IP number, each phone line has
associated features.
PHONE CONTROL
1- LINE #1
2- LINE #2
Press the number key that corresponds with your selection. Line 1 and Line 2 have the same
options. The following window appears:
8.6.2
82 en | Control Panel Programming Fire Alarm Control Panels
2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.