Filter
Top Products
Overview
System overview
The FPD‑7024 Fire Alarm Control Panel is a fully integrated hard-wire fire alarm system. It can
support four input points (expandable to 255 using D7039 Multiplex Expansion Module and
the FPC‑7034 Four-Point Expander) and 16 individual users (expandable to 100 with the
D7039). The control panel has a built-in LCD keypad. Up to four additional keypads can be
used to provide user interface with the system and programming access for the installer. The
FPD‑7024 also includes the following features:
– Built-in dual-line communicator
– Menu driven keypad programming
– Freely programmable alphanumeric/alphabetical display
– 99 event history buffer
– 16 user codes
– UL Listed, CSFM, MEA Approved
When the D7039 Multiplex Expansion Module is installed, these additional features are
available:
– 247 additional addressable input points (255 total points)
– 499 Non-volatile event history buffer
– 100 user codes
For the location of the major items on the FPD‑7024 Control Board, see the following figure:
Figure 2.1: FPD-7024 ControlBoard
1 TELCO terminal strip 7 Keypad
2 Relay terminal strip 8 D7039 MUX expansion module
connector pins
3 Smoke power terminal strip 9 LCD display
2
2.1
8 en | Overview Fire Alarm Control Panels
2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.