Filter
Top Products
For additional history log ID information, see the Modem IIIa
2
reporting table, 105.
Remote Programming
Call for remote programming
Phone Numbers 1 and 3 must be programmed, along with Account Code 1. The control panel
calls Phone Number 3 and attempts to connect for downloading. If the control panel is already
using the phone line, it sounds the three-beep error tone. This function requires an access
code with programming authority (Level 1).
Answer for remote programming
The control panel immediately seizes the phone line to answer a remote programming call.
While programming is underway, the Trouble LED flashes. This also allows on-site PC
downloading. If the control panel already uses the phone line for a report communication, it
sounds the three-beep error tone. This function requires an access code with programming
authority (Level 1).
Keypads
Built-in keypad
The keypad built into the control/communicator is an alphanumeric LCD keypad. It has a two-
line by 16-character display to provide information on various control panel functions. Usually,
the first line shows the off-normal condition, while the second line describes specific details
that might be relevant to the existing system status. A built-in sounder annunciates keystroke
entries and acts as a warning device.
6.2.9
6.3
6.3.1
40 en | System Operation Fire Alarm Control Panels
2012.08 | 04 | F01U008458 Installation and Operation Manual Bosch Security System, Inc.