Filter
Top Products
2-AUTHORITY
Personal Identification Numbers (PINs)
Programmer PIN
Shortcut: 0-PROG, 2-SECURITY, 1-PINS
The Programmer PIN is the code used by the installer to configure and operate the panel.
Factory default code is 9876 and may be changed at any time.
The following window appears:
PROGRAM PINS
1-PROGRAMR PIN
2-USER PINS
Press [1] for Programmer PIN. The following window appears:
USER 0
ENTER PIN:_______
Enter the PIN and press [#/Enter]. After you have programmed the Programmer PIN, the
previous window appears.
Program User PINs
Shortcut: 0-PROG, 2-SECURITY, 1-PINS
Up to 15 additional user codes (or up to 99 additional users when the D7039 is installed) can
be programmed to protect the system from unauthorized operation and allow a record to be
kept of actions by individual system users.
The following window appears:
PROGRAM PINS
1 - PROGRAMR PIN
2 - USER PINS
Press [2] for user PINs. The following window appears:
OTHER PINS
USER (01-15)
Enter the user for whom you want to program a PIN and press [#/Enter]. Example: For User 5,
press [5]. The following window appears:
USER 5
ENTER PIN:_______
Enter the PIN and press [#/Enter]. After you have programmed the user PIN, the previous
window appears.
Authority
Shortcut: 0-PROG, 2-SECURITY, 2-AUTHORITY
This feature determines which system actions a user can perform.
For PIN authority levels, see the following table:
8.2.1
8.2.2
Fire Alarm Control Panels Control Panel Programming | en 61
Bosch Security System, Inc. Installation and Operation Manual 2012.08 | 04 | F01U008458