Filter
Top Products
Teledyne API Model T360/T360M Operation Manual Operating Instructions
85
4.7.2.4. TRIGGER EVENTS
To edit the list of data parameters associated with a specific data channel, press:
SETUP X.X EVENT:ATIMER
<PREV NEXT> ENTR EXIT
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 1, 900
PREV NEXT INS DEL EDIT PRNT EXIT
From the DATA ACQUISITION menu
(see Section 6.7.2.2)
Press each button repeatedly to cycle through
the list of available trigger events.
SETUP X.X NAME:CONC
<SET SET> EDIT PRINT EXIT
SETUP X.X EVENT:ATIME
R
<SET SET> EDIT PRINT EXIT
ENTR accepts the new string
and returns to the previous
menu.
EXIT ignores the new string
and returns to the previous
menu.
Exits to the Main
Data Acquisition
menu
4.7.2.5. EDITING DAS PARAMETERS
Data channels can be edited individually from the front panel without affecting
other data channels. However, when editing a data channel, such as during
adding, deleting or editing parameters, all data for that particular channel will be
lost, because the DAS can store only data of one format (number of parameter
columns etc.) for any given channel. In addition, a DAS configuration can only
be uploaded remotely as an entire set of channels. Hence, remote update of the
DAS will always delete all current channels and stored data.
07272B DCN6552