Filter
Top Products
Teledyne API Model T360/T360M Operation Manual Getting Started
39
3.5.5. Current Loop Analog Outputs (Option 41)
This option adds isolated, voltage-to-current conversion circuitry to the
analyzer’s analog outputs. This option may be ordered separately for any of the
analog outputs; it can be installed at the factory or added later. Call TAPI sales
for pricing and availability.
The current loop option can be configured for any output range between 0 and
20 mA. Figure 3-8 provides installation instructions and illustrates a sample
com
bination of one current output and two voltage outputs configuration.
Information on calibrating or adjusting these outputs can be found in Section
4.13.4.3.
Figure 3-8: Current Loop Option Installed on the Motherboard
07272B DCN6552