Filter
Top Products
Configuring the interpretation system
99
COM port, menu language and password
To configure the COM port and the menu language or to change the
password:
̈ From the “File” menu, choose “Options”.
The “Options” window opens.
Configuring the COM port
To configure the COM port of the PC connected to the SDC 8200 CU central
unit:
̈ From the “COM” drop down list box in the “Serial Communications
Port” box, select the COM port of the PC connected to the COM 3
interface of the central unit.
If you click a COM port which is not available on your PC, a dialog box
with the message “COMx not available” appears (“x” corresponds to
the COM port number).
If you do not know the correct COM port, try the different options one after
the other:
̈ Then click the “Test” button.
y If a dialog box with the message “Test is successful on COMx”
appears, the PC can communicate with the central unit via the
selected COM port. Your conference system is now ready for
operation.
y If a dialog box with the message “Test failed on COMx” appears, you
have to try a different COM port.
Configuring the menu language
To change the menu language of the IM software module:
̈ From the drop down list box in the “Language” box, select the desired
menu language.