Filter
Top Products
System requirements
14
The operating system required
The SDC 8200 software requires Windows 2000 or Windows XP.
Note:
Both programs (“Confsys” to control the conference system and
“IntSys” to control the interpretation system) require one free COM
port each (RS 232 interface)! The SDC 8200 software therefore does
not function on PCs which do not have at least one free COM port not
assigned to another software – e.g. Hotsync (software for data transfer
between a PC and a Palm PDA)!
The network
You can install the software on up to eight PCs in a network. One of these
PCs must be configured as the “master” (see “Configuring the PC in a
network” on page 44). The master PC gives you access to all functions of
the conference and interpretation system. The dongle must be inserted
into a free USB port of the master PC.
Up to two PCs can be configured as “slaves” (see “Configuring the PC in a
network” on page 44). A slave PC also gives you access to all functions. The
slave PCs do not require a dongle.
Up to five PCs can be configured as “video PCs” (see “Configuring the PC in
a network” on page 44). A video PC does not give you access to the
functions of the conference and interpretation system. Projectors or
monitors connected to the video PCs are only for displaying data to the
delegates or guests. The video PCs do not require a dongle either.
Master
Slave
Video
LAN
Video
Video
Slave
Video
Video
Dongle