Filter
Top Products
Configuring the interpretation system
102
The “Initialize Units” dialog box opens.
To initialize all interpreter consoles (e.g. when initializing the
interpretation system for the first time or after rearranging the system):
̈ Click the “Full Init” button.
The signal light rings on all interpreter consoles start flashing and the
displays of the consoles show the booth number (Booth) and the desk
number (Desk) which will be assigned when you press the MICRO key:
You can manually change the booth number and the desk number on
the interpreter console (see “Manually assigning an interpreter console
an individual booth number” on page 102 and see “Manually assigning
an interpreter console an individual desk number (interpreter console
number)” on page 103 of the SDC 8200 system manual).
̈ Start initializing the interpreter consoles by pressing the MIC key ƺ of
interpreter console 1 in booth 1, continue by pressing the MIC key ƺ of
interpreter console 2 in booth 1, and so on.
The signal light ring of the corresponding interpreter console goes off.
̈ After you have pressed the MIC key ƺ on all interpreter consoles, click
the “Stop Init” button in the palette.
̈ In the palette, click the “Exit” button.
Your interpretation system is now ready for operation.
To initialize newly added interpreter consoles:
̈ Click the “Add Unit” button.
The signal light rings on all interpreter consoles start flashing.
̈ One after the other, initialize the newly added interpreter consoles by
pressing their MICRO key.
The signal light ring of the corresponding interpreter console goes off.
̈ After you have pressed the MIC key ƺ on all interpreter consoles, click
the “Stop Init” button in the palette.
̈ In the palette, click the “Exit” button.
Your interpretation system is now ready for operation.
Press Mic to confirm
BOOTH DESK
01 01