Filter
Top Products
Concord Ultra
39
Touchpad Options Menu
The TOUCHPAD OPTIONS menu lets you set up touchpad panic and arming operation. The follow-
ing section describes the touchpad option settings that appear under GLOBAL.
The following sections describe the touchpad option settings that appear under
PARTITION 1-2.
House Code (partition 1: 0401, partition 2:
0411)
Light Control-Partition 1-2 (Defaults: partition 1 = 01-B,
partition 2 = 02-C)
This setting enables X10 controlled lights to work in a
selected partition without interfering with the X10 controlled
lights of the other partition.
After setting the panel house code for each partition, you
must set the X10 controlled lights for that partition to the
same house code. The letter that appears automatically after
the house code number indicates the necessary HOUSE dial
setting for X10 modules in that partition.
¾
To set the House Code:
1. With the desired partition selected, press A or B until the
display shows
HOUSE CODE nn-x (current setting).
2. Enter the desired number (1–255). The display flashes the
entered number.
3. Press # and the display shows the new house code.
Latchkey Zones (0500)
Touchpad Options-Global (Default = none)
This setting defines the range of keychain touchpads that will
function as a latchkey user. The value entered in this section
can be any valid zone number. When a zone number is
entered, all zones at or below that zone number will function
as a latchkey user. For example, if 5 is entered, any keychain
touchpads learned into zones 1–5 will be latchkey users and
all others (6–96) will not.
¾
To set the number of Latchkey Zones:
1. With the display showing LATCHKEY ZONES nnn (current
setting), enter the desired number of latchkey zones (1–96).
The display flashes the entered setting.
2. Press # and the display shows the new setting.
¾
To delete/disable Latchkey Zones:
1. With the display showing LATCHKEY ZONES nnn (current
setting), press D.
Fire Panic (partition 1: 0510, partition 2: 0520)
Touchpad Options-Partition 1-2 (Default = on)
This setting determines whether touchpad fire panic buttons
are enabled (on) or disabled (off).
¾
To change the Fire Panic setting:
1. With the display showing FIRE PANIC OFF/ON (current set-
ting), press 1 (off) or 2 (on). The display flashes the entered
setting.
2. Press # and the display shows the new setting.
Aux. Panic (partition 1: 0511, partition 2: 0521)
Touchpad Options-Partition 1-2 (Default = on)
This setting determines whether touchpad auxiliary panic
buttons are enabled (on) or disabled (off).
¾
To change the Auxiliary Panic setting:
1. With the display showing AUXILIARY PANIC OFF/ON (cur-
rent setting), press 1 (off) or 2 (on). The display flashes the
entered setting.
2. Press # and the display shows the new setting.
Police Panic (partition 1: 0512, partition 2: 0522)
Touchpad Options-Partition 1-2 (Default = on)
This setting determines whether touchpad police panic buttons
are enabled (on) or disabled (off).
¾
To change the Police Panic setting:
1. With the display showing POLICE PANIC OFF/ON (cur-
rent setting), press 1 (off) or 2 (on).
The display
flashes the entered setting.
2. Press # and the display shows the new setting.