Filter
Top Products
Concord Ultra
31
The following describes how to program the phone settings that appear under DOWNLOADER
PHONE
.
Exception Rpts (pager 1: 0133, pager 2: 0143, pager 3:
0153, pager 4: 0163, pager 5: 0173)
Phones-Pager Phone 1-5 (Default = off)
This setting determines whether the panel reports to a pager if the system
is not armed or disarmed at the specified schedule times, if open/close
reports are turned on.
¾
To turn Exception Reports off or on:
1. With the display showing EXCEPTION RPTS
OFF/ON
(current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Open/Close Rpts (pager 1: 0134, pager 2: 0144, pager 3:
0154, pager 4: 0164, pager 5: 0174)
Phones-Pager Phone 1-5 (Default = off)
This setting determines whether opening and closing reports are sent to a
pager. When turned on, the panel sends a closing report when the system
is armed and an opening report when the system is disarmed.
Note
To use this feature, the opening reports and closing reports settings under the
REPORTING menu must be turned on for that partition.
¾To turn Opening/Closing Reports off or on:
1. With the display showing OPEN/CLOSE RPTS
OFF/ON (current setting), press 1 (off) or 2 (on).
The display flashes the entered setting.
2. Press # and the display shows the new setting.
Latchkey Rpts (pager 1: 0135, pager 2: 0145, pager 3:
0155, pager 4: 0165, pager 5: 0175)
Phones-Pager Phone 1-5 (Default = on)
This setting determines whether the panel reports to a pager when the
system is armed or disarmed, according to latchkey time scheduling.
¾
To turn Latchkey reports off or on:
1. With the display showing LATCHKEY RPTS
OFF/ON
(current setting), press 1 (off) or 2
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Streamlining (pager 1: 0136, pager 2: 0146, pager 3:
0156, pager 4: 0166, pager 5: 0176)
Phones-Pager Phone 1-5 (Default = on)
This setting determines whether the panel includes (off) or excludes (on)
the account number when reporting to a pager.
¾
To turn Streamlining off or on:
1. With the display showing STREAMLINING OFF/
ON
(current setting), press 1 (off) or 2 (on).
The display flashes the entered setting.
2. Press # and the display shows the new setting.
Ptn Assignment (pager 1: 0137, pager 2: 0147,
pager 3: 0157, pager 4: 0167, pager 5: 0177)
Phones-Pager Phone 1-5 (Default = 1)
This setting determines the partition that reports to a pager.
Both partitions can be assigned to report to a single pager.
¾
To set up Partition Assignments for pager reporting:
1. With the display showing PTN ASSIGNMENT 1/2/12 (cur-
rent setting), press 1 or 2 to select partition 1 or 2 (press
1 and 2 to select both partition 1 and 2). The display
flashes the entered setting.
2. Press # and the display shows the new setting.