Filter
Top Products
9. ASSEMBLY
S-7200C
90
Assemble each part in the order shown in the illustration.
■
Apply grease to the places marked with white arrows in the illustrations.
Use the “Grease kit (SA8837-001)” specified by Brother for the grease.
９-１. Stitch length dial and feed regulator mechanism
4087M
With the positioning pin (a) set into the
groove of the dial lock lever (b), scre
w
in the stitch length dial (7).
1. Feed regulator assembly
2. Washer
3. Feed regulator shaft
4. Set screw [2 pcs] (Tighten)
5. Notch spring
6. Positioning pin
7. Stitch length dial (Screw in)
4405M
Using the tube