Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
41
５-３. Data initialization function
NOTE:
When DIP switch 1 is set to ON, set it to OFF and then carry out the following operations.
1
Change to initialization mode
(While pressing the continuous backtack key, press the power ON switch.)
* The only initialization item is clear all.
Display
Initialization item
1 [in.AL]
Clear all
(Sewing programs (panel display), memory switch settings, speed settings and
function settings [Refer to <Setting item list> (P.40)] will be initialized.)
2
Function setting mode will be exited and normal operation will be possible.
(If you would like to cancel initialization, set the power switch to OFF.)
4206M
[in.AL] will appear in the display (1).
(Press for 2 seconds or more.)
4222M