Filter
Top Products
S-7200C
4.
FUNCTION SETTINGS (G50 OPERATION PANEL)
13
４-６. Memory switch setting method (Advanced)
1
Change to memory switch mode
(While holding down the MAX key and the FUNC (function) key,
press the power ON switch.)
2
Select a memory switch number (A)
3
Change the setting details (B)
4
The setting for the memory switch will be stored and (B) will stop
flashing and illuminate steadily.
NOTE:
The changed settings will be enabled after memory switch mode
has been exited.
5
Repeat steps 2 to 4 above to change other memory switch settings.
6
The memory switch number (A) and the
setting details (B) for that number will be
displayed in green in the main display (1).
*
If you press the or key (2) at this time, only the memory switch
numbers with a current value that is different from the initial value will
be displayed in yellow.
4192M
Normal sewing machine operation will then be possible.
4193M
2012B
2009B 2013B 2138M 2139M
2011B 4173M
* If you would like to return the setting which is currently being displayed
to the default value, press the
key.
*
If the setting details for the memory switch are different from the
original setting details, the setting details (B) will flash.
* If the setting details for the memory switch are different from the initial
values, they will be displayed in yellow.