Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
46
<Resolver signal test>
1
Change to test number display
2
Select the test number
Number Test number Test name
1 [ ALL] All tests (Test 1-Test 7)
2 [TES1] Test 1 (Individual)
3 [TES2] Test 2 (Individual)
4 [TES3] Test 3 (Individual)
5 [TES4] Test 4 (Individual)
6 [TES5] Test 5 (Individual)
7 [TES6] Test 6 (Individual)
8 [TES7] Test 7 (Individual)
3
Start the test
When the thread wiper key is pressed, the test starts.
A. For all tests [ ALL]
B. For individual tests [TES*]
NOTE:
Once testing has started, no items other than a resolver signal test can be checked.
To check a different item, carry out step 5 given below, and then change back to input check mode.
4
[If carrying out another resolver signal test]
5
[To return to the normal sewing machine starting condition]
NOTE:
If you turn the power back on while the power indicator (green) is still illuminated, [E131] may be
displayed.
(Item number)
(Test number)
A
ll tests from Test 1 to Test 7 are carried out.
・ If all tests are completed and the results are all OK, [7 OK]
will be displayed.
・ If an NG result occurs during the test, [* NG] will be
displayed as the right four characters in the display.
(* indicates the number of the test which produced the NG
result.)
Number of the test specified will be carried out.
・ If the test is completed and the result is OK, [* OK] will be
displayed as the right four characters in the display.
・ If the result is NG, [* NG] will be displayed.
2063B
2064B
2067B
Test number
Test result
(OK / NG)
Test number
Test result
(OK / NG)
Returns to test number display.
(Check)
2065B 2066B
2068B