Filter
Top Products
S-7200C
13. SETTING METHOD FOR STANDARD DEPRESSION STROKES
143
１３-２. When using the G10 operation panel
1
Signal setting entry
(Press the power OFF switch, and then set DIP switch No. 4 to ON.)
2
“FF x.x” will appear in the display (1).
(x.x indicates the depression voltage.)
(While pressing the key at C, press the power ON switch.)
3
Memorizing the maximum forward position
“nn x.x” will appear in the display (1).
(With the treadle depressed to the maximum forward position
, press the end bartack key.)
4
Memorizing the neutral position
“rr x.x” will appear in the display (1).
(With your foot released from the treadle
, press the end backtack key.)
5
Memorizing the maximum backward position
“Pd--” will appear in the display (1).
(With the treadle depressed backward to the maximum backward position,
press the thread trimming key.)
2104B
Control box
2111B 2138M
2112B
2113B
2114B