Filter
Top Products
S-7200C
4. FUNCTION SETTINGS (G50 OPERATION PANEL)
32
４-１１. Protection settings
1
Set the power switch to OFF, and then set DIP switch 1 to OFF.
2
Change to protect setting mode
(While pressing the key and the start backtack key,
press the power
ON switch.)
3
Set the protection level (0 to 3)
[If set to level 0 – 2]
4
Confirm the protection level (example: set to level 2)
5
NOTE:
The range for disabling operation varies depending on the
setting for DIP switch 1.
For details, refer to <Protection setting list> (P.34).
* If the protection level is different from the original value, the
protection level will flash in the display.
Protect setting mode will be exited and normal operation will be possible
.
4193M
[PLV] and the protection level will appear in the main
display (1) in orange. (At the time of shipment from the
factory, the protection level is set to “1”.)
The protection level will return to illuminating
steadily.
2034B
2033B
2032B 2138M
(Protection level)