Filter
Top Products
S-7200C
13. SETTING METHOD FOR STANDARD DEPRESSION STROKES
142
5
Memorizing the maximum backward position
“Pd-- ” will appear in the main
display (1).
(With the treadle depressed backward to the maximum backward position,
press the thread trimming key.)
6
Completion of setting
The buzzer will sound and “ End” will appear in the main display (1).
NOTE:
・
If you do not press the ENTER key (2), the settings will not be
memorized.
・
If the treadle is not operated correctly, “E091” may be displayed.
If this happens, after “PdFF x.xxx” appears in the main display (1),
repeat the operation from step 3.
7
(Press the power OFF switch, and then return DIP switch No. 4 to OFF.)
Control box
2108B
2109B
2110B