Filter
Top Products
9. ASSEMBLY
S-7200C
94
９-５. Feed mechanism (1)
1. Feed regulator assembly
2. Feed regulator shaft L
3. Feed regulator support shaft
4. Set screw (Sharp tip .. align with hole in feed regulator shaft L and tighten)
5. Set screw (Tighten)
6. Set screw (Tighten)
7. Rubber cap
8. Rubber cap
9. Set screw (Align with screw stop)
10. Set screw (Tighten)
4409M
Turn the feed regulator support shaft (3) so that the screw stop is facing
toward the front and so that the feed regulator assembly (1) is in a position
where it can turn smoothly with no play, and then tighten.
Lastly, check that the feed regulator assembly (1) moves smoothly.