Filter
Top Products
6. SETTING THE DIP SWITCHES (G50 AND G10 OPERATION PANELS)
S-7200C
57
６. SETTING THE DIP SWITCHES
(G50 AND G10 OPERATION PANELS)
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
1 Key protect settings ON/OFF Disables operation panel key operations. (*1)
2 Should always be set to OFF.
3 Should always be set to OFF.
4 Should always be set to OFF. (*2)
(*1) The disabled operations will vary depending on the ON/OFF settings. For details, refer to “4-11. Protection settings”
(P.32) or “5-7. Protection settings” (P.51).
(*2) If set to ON, operations using the treadle will be disabled, and so always be sure to set to OFF. If you set it to ON and
turn on the power, error code [E901] will be displayed on the operation panel.