Filter
Top Products
S-7200C
4. FUNCTION SETTINGS (G50 OPERATION PANEL)
12
Standard device settings (500-)
No.
Setting
range
Initial
value
Setting
units
Setting details
500 OFF/1-3 1 1
Actuator switch function when sewing is stopped (*1)
OFF: No operation
1: Correction sewing switch (*2)
2: Thread trimming switch (*3)
3: Cloth feed quick reverse switch (*4)
501 OFF/1-2 1 1
Actuator switch function during sewing (*1)
OFF: No operation
1: Manual backtack switch (*2)
2: Thread trimming switch (*2)
502 OFF/1 1 1
Presser foot lifter switch function
OFF: No operation
1: Presser foot lifter switch
(*1) When the pleat presser sewing key is ON, the pleat presser sewing switch function is enabled.
However, when set to “2”, the thread trimming switch function takes priority.
(*2) When the pleat presser sewing key is set to ON, the correction sewing switch function is disabled.
(*3) To make it function as a thread trimming switch while sewing is in progress, No. 501 must be set to “2”.
(*4) To make it function as a quick reverse switch while sewing is in progress, No. 501 must be set to “1”.