Filter
Top Products
9. ASSEMBLY
S-7200C
102
９-１５. Feed mechanism (2)
1. Quick reverse solenoid plunger
2. Pin
3. Washer
９-１６. Feed bar mechanism
1. Feed dog
2. Feed bar
3. Screw (Tighten)
4. Feed lifting eccentric wheel assembly
5. Set screw [2 pcs] (Tighten)
4419M
4420M
6. Feed bar assembly
7. Screw [2 pcs] (Tighten)
8. Feed lifting rock bar shaft
9. Set screw (Tighten)
4. Retaining ring C
5. Spring assembly
■
Refer to “10-8. Adjusting the feed dog height”, “10-9. Adjusting the feed dog
angle” and “10-11. Adjusting the needle and feed mechanism timing” when
carrying out assembly.