Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
48
５-６. Output checking method
This is used at the following times.
・ When there is a problem with the operation panel PCB
・ When there is a problem with the drive mechanism
・ When you would like to check for broken cords
You can check whether the signals being output by the CPU are driving the mechanisms correctly.
1
Change to output check mode
2
Select the item number
3
Change to output status display
4
5
[To check another item]
1) Return the treadle to the neutral position
2)
3) repeat the operations in steps 2 to 4 above.
6
Press the power OFF switch to turn off the power, and then turn the power back on.
* If 2 seconds pass without no operations having been carried out,
the display will alternately show the item number and the item
name.
The operation corresponding to the item number being checked will be carried out.
2159M
(Item number)
(Item number)
(Item name)
(Output status)
(Item number)
2070B 2139M
2072B
2073B
2059B 2071B
(While pressing the key, press the power ON switch.)
(Item number)