Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
38
５. FUNCTION SETTINGS (G10 OPERATION PANEL)
５-１. List of special functions when power is turned on
This section contains a list of functions for the G10 operation panel and the key operations which are used to call the setting
mode for the functions.
1
Memory switch setting mode (Standard)
(This setting is not possible with the G10
operation panel.)
7
Protect setting mode
Refer to “5-7. Protection settings”.
2
Memory switch setting mode (Advanced)
(This setting is not possible with the G10
operation panel.)
8
Software version display function
Refer to “5-8. Software version checking method”.
3
Data initialization function
Refer to “5-3. Data initialization function”.
9
Treadle position adjustment mode
Refer to “13. SETTING METHOD FOR STANDARD
DEPRESSION STROKES”.
4
Error log display function
Refer to “5-4. Error history checking method”.
10
Sewing machine reference position adjustment mode
Refer to “5-10. Adjusting the sewing machine reference
position”.
5
Input checking function
Refer to “5-5. Input checking method”.
11
Maintenance information viewing mode
Refer to “5-9. Viewing maintenance information”.
6
Output checking function
Refer to “5-6. Output checking method”.
12
Function setting mode
Refer to “5-2. Function setting method”.
[DIP switch 4 = ON]
[DIP switch 1 = OFF]
2045B
1991B
1997B, 2048B, 1999B, 2000B, 2049B
(A)
(A)
(C)
(B)
(D)
(D)
(C)
2046B, 2047B, 1999B, 1996B