Filter
Top Products
S-7200C
4.
FUNCTION SETTINGS (G50 OPERATION PANEL)
15
No.
Setting
range
Initial
value
Setting
units
Setting details
080 -7-7 0 1 Treadle backward on (thread trimming) point (S7)
081 -5-5 0 1 Treadle backward 1st step on (presser foot lifting) point (S6)
082 -5-5 0 1 Treadle forward 1st step on (presser foot dropping) point (S1)
083 -5-5 0 1 Treadle forward on (starting) point (S2)
084 -5-7 0 1 Treadle variable speed range starting point (S3)
085 -7-7 0 1 Treadle high speed range reaching point (S4)
086 -2-2 0 1
Variable speed range starting point for standing operation variable speed
pedal (S3)
087 -2-2 0 1 High speed range reaching point for standing operation variable speed pedal (S4)
088 0-3 (*2) 1
Treadle speed curve
0: Constant
1: Curves downward
2: Curves upward
3: S line curve
(*2) The initial value varies depending on the destination. For Japan, the initial value is “1”, and for all other destinations, it is “0”.
2014B
2015B
Depression stroke
Speed
Speed
Neutral
Treadle backward stroke
Depression stroke