Filter
Top Products
S-7200C
15. STANDING OPERATION PEDAL
147
１５. STANDING OPERATION PEDAL
The foot plug assembly CDD (J04099-101) that is sold separately is required.
１５-１. Installing the foot plug
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the face plate of the control box. Touching areas where high voltages are present can result in
severe injury.
1. Insert the foot plug (1) into connector <P5> on the main PCB.
2. Connect the standing pedal connector (2) to the foot plug (1).
3. Secure the cord (3) of the standing pedal with the cable tie (4).
2119B