Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
42
５-４. Error history checking method
The past error history can be checked by the following procedure.
1
Change to error history display mode
(While pressing the MAX key, press the power ON switch.)
2
Change the error history number
3
Check the history details
4
[If checking the details for another error history number]
1)
2)
Repeat steps 2 and 3 above.
5
[To exit error history display mode]
Set the power switch to OFF.
Up to 99 histories (01-99) are stored in order starting from
the newest. (No. 01 represents the newest error.)
If there is no error code, [E---] will be displayed.
* While the key (1) or the key (2) is being pressed,
the display will change to displaying the time the erro
r
occurred.
・While the key is being pressed, the last 4 digits are
displayed. [Units: 1 hour]
・While the key is being pressed, the first 3 digits
([T***]) are displayed. [Units: 10,000 hours] However, i
f
the total is less than 10,000 hours, the first 3 digits will
not be displayed.
・When the key is released, the display returns to the
original error code.
NOTE:
The following error cods do not remain in the history,
and so they will not be displayed.
[E065, E066, E095, E440, E441, E901]
(Error history number)
(Error code)
(Error history number)
2055B
2056B 2139M 2138M
2057B
2054B