Filter
Top Products
S-7200C
4. FUNCTION SETTINGS (G50 OPERATION PANEL)
36
４-１３. Viewing maintenance information
This allows you to check the information which is stored in the head detector unit.
1
Change to maintenance display mode
(While pressing the keys, press the power ON switch.)
2
Select the item name
No. Item name
Item name (A)
display
Details (B)
1 Grease up counter *1 [GUCT] [ 0-102](%)
2 Grease-up time [GULI] [4000] (hours)
3
Cumulative power on time
(7 characters)
[PONT] [****] (hours) *2
4
Cumulative operating time
(7 characters)
[MONT] [****] (hours) *2
3
*1 : If the RESET key is pressed for 2 seconds or more while the grease up
counter details are being displayed, the counter will be cleared.
*2 : Normally the last 4 digits of the counter are displayed, but if you press the
key (2), the first three digits ([T***]) will be displayed.
The item name (A) and the details fo
r
that item (B) will be displayed in the
main display (1) in orange.
Maintenance display mode will be exited and normal operation will be possible.
4193M
2039B 2138M 2139M
2036B 2040B 2138M