Filter
Top Products
S-7200C
5. FUNCTION SETTINGS (G10 OPERATION PANEL)
55
５-９. Viewing maintenance information
This allows you to check the information which is stored in the head detector unit.
1
Change to maintenance display mode
(While pressing the and keys, press the power ON switch.)
2
Select the maintenance item
No. Item name
Item name
display
1 Grease up counter [GUCT]
2 Grease up time [GULI]
3 Cumulative power on time [PONT]
4 Cumulative operating time [MONT]
3
Change to detail display
No. Item name Detail (Display)
1 Grease up counter *1 [ ***] 0-102(%)
2 Grease up time [4000] (Units: 1 hour)
3
Cumulative power on time
(7 characters)
[****] (Units: 1 hour) *2
4
Cumulative operating time
(7 characters)
[****] (Units: 1 hour) *2
4
[To check another item]
1)
2) Repeat steps 2 to 3 above.
5
*1: If the continuous backtack key is pressed for 2 seconds o
r
more while the grease up counter details are being
displayed, the counter will be cleared.
*
2: Normally the last 4 digits of the counter are displayed, but
if you press the key (1), the first three digits will be
displayed.
Maintenance mode will be exited and normal operation will be possible.
4206M
2083B 2138M 2139M
2087B
(Details)
2085B 2086B 2138M
(Item name)
2084B
(Item name)
(Item name)