Filter
Top Products
S-7200C
4. FUNCTION SETTINGS (G50 OPERATION PANEL)
24
４-９. Input checking method
This is used at the following times.
・ When there is a problem with an operation panel key, PCB or sensor
・ When you would like to check for broken cords
・ When you would like to adjust a sensor position
This lets you check if the CPU is reading signals from the keys and the sensors correctly.
1
Change to input check mode
(While pressing the key, press the power ON switch.)
2
Select the item number (A)
3
Check the responses from the keys and switches, etc. while referring to the <Input check list> (following page).
4
[To return to the normal sewing machine starting condition]
Press the power OFF switch to turn off the power, and then turn the power back on.
The item number (A) and the input status (B)
will appear in the main display (1) in orange.
* If 2 seconds pass without no operations having been carried out,
the four characters on the left side of the main display will
alternately display the item number and the item name.
2036B 2095B
(Item number)
(Item name)
2019B 2138M