Filter
Top Products
S-7200C
4. FUNCTION SETTINGS (G50 OPERATION PANEL)
18
Panel operation settings (350-)
No.
Setting
range
Initial
value
Setting
units
Setting details
350 ON/OFF ON -
Buzzer (electronic sound) during panel operation
ON: Used
OFF: Not used
* The buzzer will always be ON when a warning or error is displayed.
351
0-10
(seconds)
0
(seconds)
1
Additional display time for model name in head detector PCB when power
switch is turned on
0: Not displayed
1-10: Machine head model name is displayed for the set time in the main
display using 8 characters
352 ON/OFF ON -
Limit for maximum speed setting in start and end backtacking speed settings
ON: Limited by MAX key and speed bar key settings
OFF: Not limited by MAX key and speed bar key settings
353 ON/OFF ON -
End backtack sewing speed
ON: Separate setting from start backtack sewing speed is possible
OFF: Setting for start backtack sewing is used
* Refer to “4-3. Maximum sewing speed and start backtack sewing speed
setting methods”.
354 0-2 1 1
Correction sewing function
* This is only enabled when No. 500 is set to “1”.
* When the <correction sewing> icon at the left side is turned off, the
operation will be what is illuminated at the right side.
0: Half stitch correction sewing / Single stitch correction sewing
1: No correction sewing / Single stitch correction sewing
2: Reverse stitch (reverse feed) correction sewing / Single stitch correction
sewing