Pelco C1554M-A (4/05) Home Security System User Manual


 
C1554M-A (4/05) 85
PORT BUFFER TAB
The Port Buffer tab shows the data coming in the COM port. The Port Buffer tab is used for diagnostic purposes.
Figure 90 shows an incoming string that matches the Pelco ASCII Protocol Alarm Pattern. Specifically, the substring ‘3Ea’ matches the Pelco ASCII
Protocol Alarm Pattern.
Once a string has been matched, it remains on the Point Buffer tab until a new string starts to come in, at which point the new string displays on
the tab.
Figure 90. Port Buffer Tab