Pelco C1554M-A (4/05) Home Security System User Manual


 
114 C1554M-A (4/05)
User who acknowledged the event
Source device associated with the event
Event description
Comments entered by the operator who acknowledged the event
Event priority
By default, when you first retrieve events from the archive server, no events are filtered out. In other words, a complete list of archived events for
the selected date/time is displayed in the Session Manager. When a filter has been applied, an asterisk appears beside Filter in the Event Picker.
Figure 130. Filtering Archived Alarms and Events
To filter the events displayed:
1. Click Filter at the left side of the Event Picker. The Filter dialog box opens. If you have filtered events before, the settings for the previous
filter appear.
2. Clear all: If a previous filter is in place and you want to reset all the settings to their default values, click Clear All, then click Apply. The
settings are reset to their default values.
3. Servers tab: If you want to filter on server, click the Servers tab and select each server whose events you want displayed. You can only
filter on servers you are currently connected to. Clear any servers whose events you do not want displayed.
To display the events from all the servers you are connected to, select Any Server.
Figure 131. Filter Dialog Box - Servers Tab
4. Categories tab: If you want to filter on alarm/event category, click the Categories tab and select each category you want displayed.
For example, to display events belonging to the Door Alarms category only, select Door Alarms.
You can only filter on alarm/event categories defined on servers you are currently connected to. Your system administrator should instruct
you in what categories there are, and what each category represents. Clear any categories you do not want displayed.