Pelco C1554M-A (4/05) Home Security System User Manual


 
C1554M-A (4/05) 69
Unassigning a Preset
Unassigning a camera’s preset deletes the preset’s name and script tag, leaving the camera position stored in the camera intact. When you
unassign a preset, the following changes take effect:
The preset name no longer appears in the presets drop-down list in the camera’s gadget.
Scripts defined by the system administrator can no longer refer to the preset.
To unassign a camera’s preset, you must belong to, and log in under, a user group that allows you to edit the presets for that camera.
To unassign a preset:
1. Open the Device Control dialog box for the desired camera and go to the Presets tab.
2. Click the preset, and then click Unassign. The preset’s name and script tag are deleted and the preset appears in the list as Unassigned_i.
Scripts will no longer be able to refer to the preset, and the preset will no longer be available through the presets drop-down list in the
camera’s gadget.
NOTE: Unassigning a preset that is referred to in a script introduces an error into the script.
Setting the Camera’s Home Preset
A camera’s home preset is the preset the camera goes to when it has been idle for a predefined time. The home preset displays in bold print in
the Device Control dialog box presets list.
To set a camera’s home preset, you must belong to, and log in under, a user group that allows you to edit the presets for that camera.
NOTE: You can define a home preset or a default pattern for a camera, but not both. Setting the home preset clears the default pattern, if there
is one.
To set the home preset:
1. Open the Device Control dialog box for the desired camera and go to the Presets tab.
2. Click the preset you want as the home preset, and then click Set Home. The Edit Home Preset dialog box opens.
Figure 69. Edit Home Preset Dialog Box
3. Enter the number of hours, minutes, and seconds that you want the camera to be idle before it goes to the home preset position.
4. Click OK. The Edit Home Preset dialog box closes. The selected preset becomes the home preset, replacing the previous home preset or
default pattern if there was one. The new home preset appears in bold print in the list.
Clearing the Camera’s Home Preset
To clear a camera’s home preset, you must belong to, and log in under, a user group that allows you to edit the presets for that camera.
To clear the home preset:
1. Open the Device Control dialog box for the desired camera and go to the Presets tab.
2. Click the home preset from the list of presets, and then click Clear Home. The selected preset no longer appears in bold print in the list.
The camera has no home preset.