Filter
Top Products
C1554M-A (4/05) 63
2. Time: Click the hour and either type the new hour or click the up and down arrows at the right of the box to advance the time or set it back.
Repeat for the minutes and seconds, as required. You do not need to type leading zeros in single-digit hours, minutes or seconds.
3. Set: To have the date and time you entered come into effect, click Set.
ON-SCREEN DISPLAY
The On-Screen Display tab of the switcher’s Device Control dialog box allows you to display the switcher’s on-screen menu on the active destina-
tion device or custom window. The options presented in the on-screen display depend on the switcher model. In general, arrow keys are used for
menu navigation and selection of menu options. The numeric keys are used for entering the password. Refer to the Pelco switcher documentation
for information on specific options.
To display the switcher’s on-screen menu:
1. Open the switcher’s Device Control dialog box and go to the On-Screen Display tab.
Figure 62. Device Control Dialog Box - On-Screen Display Tab
2. Click Show On-Screen Display.
If the switcher requires a password, you are prompted to enter the password before the on-screen display opens. The on-screen menu
appears in the active destination device or custom window. Refer to the Pelco switcher documentation for information on navigating the
menu, selecting options and exiting the on-screen display.
Figure 63. Sample On-Screen Display
NOTE: Having the on-screen display open interferes with camera control. The cameras cannot be controlled by any user when the on-screen
display is open. Control returns when the on-screen display is closed.