Filter
Top Products
90 Configuring the Library Chapter 3
Configuring the Library
Note When you reconfigure the library, you may also need to
reconfigure your backup software. For more information, consult
the documentation provided with your software.
You can change the following configuration options for the library:
Main Menu -> Administration -> Change Configuration
Table 11 Configuration Options
Menu Item Description Default Options
Password See Enabling and Changing the Password on
page 92.
Off On or Off
Network
Access
See Using the Remote Management Card on
page 96.
DHCP Off Assign an IP
address or use
DHCP
Mailslot
Configuration
See Configuring the Mailslot on page 93. One-slot 0 slots, 1 slot, 1
magazine, or 2
magazines
Fibre Channel
or SCSI IDs
See Configuring the Library for Fibre Channel
on page 102 or Setting SCSI IDs on page 106.
N/A N/A
Save Element
Reserve After
a Power Cycle
Allows the host to continue reserving drive or
slots after a power cycle (a SCSI element
reservation). This is typically used to ensure that
only one host can access a slot or drive. See
Configuration Information on page 112.
Off On or Off