Filter
Top Products
84 Accessing Tapes in the Library Chapter 2
— When inserting DLT cartridges into the tape library magazine, ensure
that each cartridge is positioned with the write-protect switch facing
out of the magazine and away from the magazine handle (Figure
39). Push the tape into the slot until it “clicks” into place.
Figure 39 Loading DLT Tapes into a Magazine
6. Reload the magazine into the drawer, and close the drawer. The library
will run an inventory check on the contents of that tape drawer.
Note If the library does not have all magazines, it will report a partial
availability message (see Partial Availability State on
page 120).
Write-Protect Switch