Filter
Top Products
2Notice hp surestore tape library
Notice
This document contains information that is
protected by copyright. All rights are reserved.
No part of this document may be photocopied,
reproduced, or translated into another
language. The information contained in this
document is subject to change without notice.
Typographical Conventions
and Terms
Bold: Menu choices and screens on the
library.
[Bold]: Soft keys to press on the library.
Computer: Host and SCSI commands.
Emphasis: Draws attention to items within
text.
This table format indicates the menus you need
to enter on the library front panel:
Note Notes explain significant concepts
or operating instructions.
Caution Cautions call attention to an
operating procedure or practice
that could damage the product if
not correctly performed. Do not
proceed until you understand and
meet these required conditions.
WARNING Warnings call attention to a
procedure or practice that could
result in personal injury if not
correctly performed. Do not
proceed until you fully understand
and meet the required conditions.
In This Manual
Chapter 1 Installing the Library: Describes
how to install, rackmount, connect,
and power on the library.
Chapter 2 Operating the Library: Describes
the front panel menu structure,
menu trees, and drive and tape
operations.
Chapter 3 Library Administration: Describes
configuration options, diagnostic
tests, and retrieving information
about the library.
Chapter 4 Troubleshooting and Diagnostics:
Describes how to troubleshoot
library problems, resolve error
conditions, and use HP diagnostic
tools.
Chapter 5 Replacing Parts and Upgrading
Firmware: Describes how to
replace library components and
upgrade library and drive
firmware.
Appendix A Technical specifications: Describes
environmental, library, physical,
SCSI cable, and Fibre Channel
cable specifications.
Appendix B Customer Support: Includes
support information for the library.
Appendix C Error Code Reference: Includes
hard error codes for the library
and suggestions for recovery.
Main Menu -> Operations -> Mailslot Access