Filter
Top Products
218 Library Error Codes Appendix
131 83H Remote management
card is missing or
faulty.
■ Ensure the remote management card is
installed.
■ Power cycle the library.
132 84H Remote management
card board timeout.
Retry command.
133 85H A remote
management card
has failed.
Power cycle the library.
134 86H The remote
management card is
not on library level 1.
Move the remote management card to the correct
library level (on the bottom level). See Figure 47 on
page 131.
135 87H Failed because more
than one remote
management card is
present.
Remove the extra remote management card. There
should be one card installed on the library and on
the bottom library level. See Figure 47 on page
131.
136 88H Failed because the
library expansion
card is missing or
faulty.
Ensure the library expansion card is properly
installed, seated, and connected.
137 89H Failed because the
library expansion
card is present, but on
the wrong library
level.
Move the library expansion card to the fifth library
level. See Figure 47 on page 131.
138 8AH Failed because more
than one library
expansion card is
present.
Remove the extra library expansion card. There
should be one card installed on the library and on
the fifth library level.
140 8CH Front panel Send
command did not
complete.
Retry the operation.
Table 46
Error Codes and Recovery Procedures
Decimal
Error
Hex
Error
Description Recovery Method