Filter
Top Products
Chapter 5 Removing and Replacing Cards 161
Chapter 5
Replacing a Card
1. Align the edges of the replacement card with the card slot.
2. Gently push on the lower third of the replacement card, inserting it into the
library until the card is flush with the library. This will help ensure that the
backplane pins are optimally aligned.
3. Tighten the thumbscrews with a flat-blade screwdriver.
4. Reconnect external cables.
5. Power on the library.
6. Download new firmware (see Upgrading Firmware on page 176).
7. If installing Fibre Channel cards for the first time, configure the library
from the front panel. See Configuring the Library for Fibre Channel on
page 102.