112 Retrieving Library Information Chapter 3
Drive Information
1. From the Drive Information menu, use the [-] or [+] keys to select the desired
drive module.
2. Select [OK] to display and select one of the following options:
— Event Log: Displays significant events for the selected drive position,
including drive errors, online/offline transitions, and drive cleaning.
Note This log is still available while a drive is being removed.
— Odometer: Displays a count of cumulative power-on hours and drive
loads. (This option is available for DLT tape libraries only.)
— Identity: Displays the drive type, serial number, and firmware revision.
Configuration Information
From the View Configuration menu, select the desired library function to view
current information about the following. (See page 91 for factory defaults.)
■ Password enabled status
■ Network access configuration
■ Mailslot configuration
■ SCSI ID assignments or Fibre Channel status
■ Save SCSI element reserve after a power cycle
■ Other configuration options (report recovered error logs and prevent
media access)
Main Menu -> Information -> Drive Information
Main Menu -> Information -> View Configuration
