Filter
Top Products
5.2.5 Preparing (creating) the program configuration
5 - 7
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
5.2 Creating a Project
Refer to the following manual for the details on registering a program block to a task:
GX Works2 Version 1 Operating Manual (Structured Project)
5. Select "Program Setting" "No Execution
Type" "MAIN" Task_01
*1
on the Project
view, right-click the Task_01, and then select
the menu item "Open Task Setting".
The Task Setting (task name
*1
) window appears.
*1: The Task Name is "Task_01" for this example.
6. Click the button to display the Program
Selection screen.
7. Select the program block name.
Click the button to register the selected
program block to the Task Setting screen and close
the Program Selection screen.
Repeat the steps 6 and 7, and register three
program blocks for the tea pouring operation, water
refilling operation and warning indicating operation
in the following order to the Task Setting screen.
Settings
Click it.
• Libraries : Select <ALL>.
• Program : Select the following programs in this
order.
1) pouring
2) refilling
3) indicating