Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


 
5.4.2 Batch monitoring of device values
5 - 19
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
5.7 Printing
5.7 Printing
For the Printing a project procedure, refer to the following.
3.7 Printing
5.8 Saving a Project
Refer to the following section for the project saving procedure:
3.8 Saving a Project
5.9 Exiting GX Works2
Refer to the following section for the project ending procedure:
3.9 Exiting GX Works2