Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


 
1 - 5
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
1.2 Program Creation Procedure
6. Conversion
7. Connecting the programmable controller CPU
8. Writing to the programmable controller
9. Checking operations
10.Printing
11.Exiting GX Works2
Procedure Reference
Compile the program. 3.2.7
Procedure Reference
Connect the personal computer to the programmable controller CPU.
3.3.1
Set the connection destination.
Procedure Reference
Write the parameters to the programmable controller CPU.
3.3.2
Write the program to the programmable controller CPU.
Procedure Reference
Monitor the sequence program execution status, and check operations.
3.4
4.4
5.4
Check for errors in the programmable controller. 3.5
Procedure Reference
Print the program and parameters.
3.7
4.7
5.7
Procedure Reference
Save the project. 3.8
Exiting GX Works2. 3.9