Filter
Top Products
3.3.1 Connecting the personal computer to the programmable controller
3 - 21
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
3.3 Writing a Project to the programmable controller
3.3 Writing a Project to the programmable controller
Write a project to the programmable controller CPU.
3.3.1 Connecting the personal computer to the programmable
controller
Connect the personal computer and a programmable controller with a cable, and set the connection
channel.
■ Connecting the personal computer to the programmable controller
Make sure to turn OFF the power of all units before connecting the personal computer to the
programmable controller CPU.
Refer to the following manual for the details on setting when using another channel or using the FXCPU
for connection.
■ Setting the Transfer Setup
Set the channel to connect the personal computer to the programmable controller CPU (Q02HCPU)
with a USB cable.
Refer to the following manual for the details on setting when using another channel or using the FX
CPU for connection.
GX Works2 Version 1 Operating Manual (Common)
1. Click "Connection Destination" in the view
selection area on the Navigation window to
display the Connection Destination view.
2. Double-click "Connection1" in the Current
Connection on the Connection Destination view
to display the Transfer Setup screen.
Programmable controller
(Q02HCPU)
Notebook personal computer
USB Cable
Click it.
Double-click it.
(To the next page)