Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


 
3.2.4 Setting parameters
3 - 7
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
3.2 Creating a Project
3.2.4 Setting parameters
Set parameters.
1. Double-click "Parameter" "PLC Parameter"
on the Project view to display the Q Parameter
Setting screen.
2. Click the button to determine the
settings and close the screen.
The parameters remain unchanged from the initial
setting in the example in this manual.
Refer to the following manuals for the details on
parameter setting:
GX Works2 Version 1 Operating Manual
(Common)
CPU Manual
CPU Programming manual
Manual of the Network being used
Double-click it.
Click the [End]
button after
finishing the setting.