Filter
Top Products
3.2.6 Creating a program
3 - 11
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
3.2 Creating a Project
3.2.6 Creating a program
Create the Structured ladder/FBD program shown in Section 3.1.2.
1. Double-click "POU" "Program"
"POU_01" "Program" on the Project view to
display the POU_01 [PRG] Program [Structured
Ladder/FBD] screen.
2. Drag "Function" "LDP" from the Function
Block Selection window, and drop it on the
POU_01 [PRG] Program [Structured Ladder/
FBD] screen to position it there.
Positioning Function and Function block using the Function Block Selection window
You can easily position Function and Function block by dragging them from the Function Block Selection
window.
Perform the following procedure to display the Function Block Selection Window:
Select "View" "Docking window" "Function Block Selection Window".
In the example below, drag the Function "LDP" from the Function Block Selection window, and drop it on the
POU_01 [PRG] Program [Structured Ladder/FBD] screen to position it there.
Refer to the following manual for the details:
GX Works2 Version 1 Operating Manual (Structured Project)
Using ladder symbols instead of the Function "LDP (Rising Edge)"
Click (Rising Edge) on the structured ladder/FBD toolbar, and then click a desired location to position the
Rising Edge there.
Double-click it.
Position "LDP".
2) Drop it.
1) Drag it.
(To the next page)