3 - 36
3.4.2 Batch monitoring of device values
3 CREATING PROGRAM IN STRUCTURED LADDER/FBD LANGUAGE
GX Works2
8. Click on the screen to close the Device/
Buffer Memory Batch Monitor screen.
9. Set the programmable controller CPU to STOP.
Set the RUN/STOP switch on the programmable
controller CPU to "STOP".
You can switch the programmable controller status
between "RUN" and "STOP" using remote
operation.
For the remote operation, refer to the following.
"Point" in the 3.4.1
● Opening two or more Device/Buffer Memory Batch Monitor screens
You can open two or more Device/Buffer Memory Batch Monitor screens.
The screen number is indicated at the end of the screens title.
● Changing the current value
Click the button on the Device/Buffer Memory Batch Monitor screen to display the Modify
Value screen which allows you to change the current value.
1. Select a device whose current
value is to be changed.
Click it.
Number
Selecting
(To the next page)