Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


 
4 - 6
4.2.7 Compiling a program
4 CREATING PROGRAM IN ST LANGUAGE
GX Works2
4.2.7 Compiling a program
Refer to the following section and manual for compiling:
3.2.7 Compiling a program
GX Works2 Version 1 Operating Manual (Structured Project)
Selecting a label from the Label Registration/Selection screen
You can input a label also by selecting it from the Label Registration/Selection screen.
Perform the following procedure to display the Label Registration/Selection screen.
Select "Edit" "List Operands".
Click (List Operands).
Refer to the following manual for the details on the Label Registration/Selection screen:
GX Works2 Version 1 Operating Manual (Structured Project)
Using templates
Using templates according to the instructions/functions.
5. Input "MOVP(X2,20,VAR1
*1
)" directly .
You can select "Function" "MOVP" on the
Function Block Selection window.
Settings
MOVP(X2,20,VAR1
*1
)
*1: The label VAR1 is set in Section 4.2.5.
Select a label to be used.
Click the Apply button to set the selected label.